Matek HUBOSD8-SE PCB

Matek HUBOSD8-SE PCB

HUBOSD8-SE has been engineered to provide the highest possible performance and reliability in a 46*36mm & 4 layers PCB. It is a multifunctional HUB with PDB, BEC 5V/1.5A &10V/1.5A, Current sensor 184A, STOSD. It is specially made for the mini FPV Quad. Built-in STOSD8 can support Plug & Play, no complicated settings needed.

Specifications:

Input: 9~27V (3-6S LiPo)
Input TVS protection
Current Rating: 4X30A (Max.4x39A)
Current sensor 184A
Built-in STOSD8-SE
46x36x4mm, 9g
Mounting holes 30.5mm Ø3mm

BEC 10V Outputs
Designed for Video TX or FPV camera.
Voltage: 10.0 +/- 0.2VDC
Continuous current: 1.5 Amps (Max.2A 10s/minute)
Output Ripple: 15mV (VIn=24V, [email protected] load)
Short-circuit tolerant (2 seconds/minute)
10V can be used to power cameras labeled as 12V

BEC 5V Outputs
Designed for RC Receivers, Flight controllers, OSD, and Servos.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 1.5 Amps (Max.2A 10s/minute)
Output Ripple: 23mV (VIn=24V, [email protected] load) Short-circuit tolerant (2 seconds/minute)

STOSD8 
Autodetect PAL/NTSC
Dynamic on screen info
Automatic flight timer
Automatic cell detection
Low battery alarm
Exceeding mAh alarm
Min.voltage & Max.current recorder
Onscreen Pilot ID
Firmware upgradable
Simple GUI & setting
Plug & Play