The Jumper R1+ receiver is a full range receiver compatible with devices using the Frsky D16 mode, with dual IPEX connectors on the antennas giving integrated redundancy and making it very easy to replace them. The Jumper R1 is a great choice micro receiver for your racing drone.
It uses ACCST protocol D16 to communicate with a transmitter, so it can be used with Jumper & Frsky Taranis transmitters.
The R1 also supports SBUS/S.PORT including telemetry data all over one wire.
Item Name: R1+ Receiver
Size: 20*15*5mm (without antenna)
Number of channels: 16ch
RSSI (Signal Strength Indication) output: 0-3.3v
Data return: SBUS/S.PORT
Operating voltage range: 4.0~6V
Operating current range: 80mA@5V
Effective distance: full distance (>1.5km)
compatibility: FrSky D16 Mode Transmitter
Press and hold the receiver’s bind button, turn on the power, the receiver will now enter binding mode.
The red light is always on and the green light is flashing slowly.
Turn on the remote control and begin the bind procedure according to your radio. After the bind is successful the red light is off and the green light is always on.
When the receiver loses the signal, the green light is off and the red light is flashing slowly.
1 x R1 Receiver with Dual Antenna’s
1x Wire Set